MAX485 Signal Converter to RS-485 Protocol

MAX485 integrated circuit. Low power RS-485/RS-422 transmitter. Low power transceiver. Contains a conductor and a receiver. Response speed is not limited allowing you to stream up to 2.5Mbps. The conductor is the limited short-circuit current and is protected against excessive power dissipation by the thermal shutdown circuit that puts the controller outputs in a high impedance state. It has failure test circuits that has a high logic receiver output when the receiver input is open.

• 4.75V to 5.25V supply voltage range
• Operating temperature range from -40 ° C to 85 ° C
  
• Designed for half duplex communication
  
• Receiver/controller enable function
  
• The quiescent current is 300 μA
  
• Allows up to 32 transceivers on the bus
• Applications: Communications and Network, Industrial

Main features:

• Device Type: Conductor/Receiver Transceiver
  
• Interface type: RS422, RS485
• Number of drivers: 1
• Number of receivers: 1
• Minimum Voltage Supply: 4.75V
• Maximum Voltage Supply: 5.25V
• Minimum operating temperature: 0 ° C
• Maximum operating temperature: 70 ° C
• Encapsulated: Dip
• Number of pins: 8