Color Sensor (RGB) TCS3200

TCS230 Color Sensor - TCS3200, can filter RGB data from the light source and convert it into a square wave (50% duty cycle) with a frequency directly proportional to the intensity of the radiation light.

The output frequency can be scaled by one of three pre-set values via two input control pins S0 and S1, with selectable 2%, 20% and 100% frequency options; The S2 and S3 pins are used to control the RGB filter.

Main features:

• DC operating voltage: 3V ~ 5V
• S0 - S1: Output frequency scale selection inputs
• S2 - S3: Photodiode-type selection inputs
• Out Pin: Output Frequency
• OE PIN: Output frequency (low active)
• Scale the output frequency
• Functions shutdown pin.
• 0.2% non-linear error at 50 kHz
• High resolution of light intensity to frequency conversion.
• Full-scale programmable color filter
• Low power consumption mode.
• LEDs included in the PCB to illuminate the object to be recognized.
• It communicates directly with a PIC microcontroller, Arduino board, Raspberry Pi or any other compatible development card.